Sharp BU Series - Full Power; Spot Air

EN-16
FULL POWER
In this operation, the air conditioner
works at the maximum power to
make the room cool or heat rapidly.
1
Press during COOL or HEAT.
• The remote control displays .
• The temperature display goes o󰀨.
TO CANCEL
Press again.
NOTE:
• The unit will operate at “Extra HIGH” fan
speed for 15 minutes for long distance delivery
of conditioned air, and then shift to “HIGH” fan
speed after 15 minutes.
• You can not set the temperature or fan speed
during the FULL POWER operation.
1
1
The louvers are adjusted so that
airow is delivered to the desired area.
1
Press .
NOTE:
• If you want the SPOT AIR setting in the FULL
POWER mode, press
during the FULL
POWER operation.
(Only for ZHU Series)
CANCEL
SPOT AIR