Sharp BU Series - 1.2.3.5 H off TIMER

EN-21
ENGLISH
TIMER
TO CANCEL TIMER MODE
(for OFF TIMER and ON TIMER)
Press .
• on the unit goes o󰀨.
•
The current clock time will be displayed on the
remote control.
CANCEL
TO CHANGE TIME SETTING
Cancel the TIMER setting rst, then set
it again.
COMBINED USE OF ON AND OFF
TIMERS
You can use the ON and OFF timers in
combination.
Example:
To stop operation at 11:00 p.m. and resume
operation to bring the room temperature to the
desired level by 7:00 a.m.
1
Set the TIMER OFF to 11:00 p.m. during
operation.
2
Set the TIMER ON to 7:00 a.m.
After setting, press
.
on the remote control blinks,
showing 7:00 AM.
After setting, press
.
on the remote control blinks,
showing 11:00 PM.
NOTE:
• You cannot program the ON-TIMER and
OFF-TIMER to operate the unit at di󰀨erent
temperatures or settings.
• Either timer can be programmed to activate
prior to the other.
• When
is pressed, all the timer setting
will be cancelled (including ON TIMER, OFF
TIMER and 1.2.3.5h OFF TIMER).
When the 1
.
2
.
3
.
5h OFF TIMER is set,
the unit will automatically turn o󰀨
after the setting hours.
1
Press .
• on the unit lights orange.
• The remaining time will be indicated on the
remote control in 1-hour increments
.
CANCEL
1
1.2.3.5h OFF TIMER
Before setting the timer, make sure the clock is properly set with the current time.
TO CANCEL
Press or . Next,
press
.
• on the unit goes o󰀨.
• The current clock time will be displayed on
the remote control.
NOTE:
• The 1
.
2
.
3
.
5h OFF TIMER has priority over
TIMER ON and TIMER OFF.
• If the 1
.
2
.
3
.
5h OFF TIMER is set while the unit
is not operating, the unit will operate at the
formerly set condition and stop after a period
of set time.
• If the ON TIMER and/or OFF TIMER are set.
TIMER CANCEL button cancels every setting.
CANCEL