Sharp BU Series - Eco Mode; Motion Sensor

EN-17
ENGLISH
The air conditioner can be controlled
intelligently according to human
activity.
1
Press .
ENERGY SAVING OPERATION
Energy saving operation will start in case no
human activity is detected for more than 60
minutes.
When human activity is detected again, energy
saving operation will stop and original operation
will be restored.
ACTIVITY DETECTION
If human activity becomes more active, air
conditioner will adjust the set temperature for
better comfort.
• Air conditioner cools more (or heats less in
HEAT mode) than your set temperature.
• Furthermore, in COOL mode with louver
setting AUTO, fan speed increases, and air
ows downward.
MOTION SENSOR
NOTE:
• If there is no movement of person for a long
period of time or movements are blocked by
furniture, the sensor may incorrectly detect the
room as vacant.
• If there are small animals or objects (like heater)
with high temperature in the room, the sensor
may incorrectly detect one or more persons.
(Only for ZHU Series)
1
ECO MODE
The unit operates with lower power
consumption than usual in this
mode.
1
During operation, press .
• The remote control displays .
1
NOTE:
• ECO MODE operation is not available in
PLASMACLUSTER only mode.
TO CANCEL
Press again.