Sharp BU Series - Multi Space; Self Clean

EN-18
NOTE:
• The unit will operate at “Extra HIGH” fan speed
for 15 minutes for long distance delivery of
conditioned air, and then shift to “HIGH” fan
speed after 15 minutes.
• FAN SPEED button will be disabled during
this operation.
• E󰀨ectiveness of this function may di󰀨er
depending on the room layout, installation
position of the unit, and insulation level of the
space concerned.
The unit operates COOL or HEAT
for multiple rooms in well-insulated
house.
1
During COOL or HEAT, press .
•
The remote control displays and fan
speed icon will be changed to “
”.
•
Louver angle will be changed to the
position for long distance delivery of cool
or warm air.
(COOL mode)
• The remote control displays “
”.
(HEAT mode)
• The remote control displays “
”.
MULTI SPACE
1
SELF CLEAN
SELF CLEAN circulates air with
Plasmacluster ions. The air dries
inside the unit and helps prevent
mold growth.
1
Press when the unit is not
operating.
• The remote control displays for a
minute.
•
on the unit lights blue.
• The PLASMACLUSTER indicator also
lights blue. (Only for
ZHU Series )
• SELF CLEAN ends after 90 minutes.
TO CANCEL
Press .
• on the unit goes o󰀨.
• The PLASMACLUSTER indicator also
goes o󰀨. (Only for
ZHU Series )
NOTE:
• During SELF CLEAN, following buttons are
deactivated: temperature, fan speed, air ow
direction and timer.
• SELF CLEAN does not remove mold already
grown in the unit.
• SELF CLEAN may run in HEAT in accordance
with environment (not applicable to multi zone
system).
1
TO CANCEL
Press again.