Sharp BU Series - Timer

EN-20
TIMER
TIPS ABOUT OFF TIMER OPERATION
When the OFF TIMER mode is set, the
temperature setting is automatically adjusted to
prevent the room from becoming excessively
warm or cool, for example while you sleep. (Auto
Sleep function)
COOL MODE:
• One hour after the timer operation begins, the
temperature setting rises 1.8°F(1°C) higher
than the original temperature setting
.
HEAT MODE:
• One hour after the timer operation begins, the
temperature setting drops 5.4°F(3°C) lower
than the original temperature setting.
3
2
1
ON TIMER
1
Press .
2
on the remote control blinks ;
press to set time.
(The time can be set by 10 minutes.)
3
Select the operation condition.
4
Press .
• on the unit lights orange.
NOTE:
• The unit will turn on prior to the set time
to allow the room to reach the desired
temperature by the programmed time.
(Awaking function)
1
4
2
Before setting the timer, make sure the clock is properly set with the current time.
OFF TIMER
1
Press .
2
on the remote control blinks;
press to set time.
(The time can be set by 10 minutes.)
3
Press .
• on the unit lights orange.