Sharp CD-G7500V - Various Disc Functions

04/3/23 CD-G7500V(Z)E3.fm
E-22
ENGLISH
TINSZA101AWZZ
4
CD-G7500V
CP-G7500
Disc Playback
Notes:
"
Whilst the disc is being read ("TOC READ" is displayed), you
cannot play another disc. The 1 - 5 buttons work, but the /
( SELECT/RESUME) button does not.
"
Playback control allows a video CD to be played back according
to instructions recorded on the disc. The "previous", "next",
"return" and "select" operations may function differently, depend-
ing on the PBC CDs.
"
Some video CDs with playback control may have an "auto
pause" recorded on them. When such a disc is played, the
screen will stop automatically at the point where an "auto pause
signal" has been inserted.
"
If the picture looks dirty when a video CD is played back, there
may be a scratch on the video CD. Replace it with another video
CD in good condition.
Caution:
"
Do not place two discs in one disc tray.
"
Do not play discs with special shapes (heart- or octagon-shaped)
as it may cause malfunctions.
"
Do not push the disc tray whilst it is moving.
"
If the power fails whilst the tray is open, wait until the power is
restored.
"
If the disc tray is stopped with force, "ER-CD20" will appear on
the display for 3 seconds and the unit will not function. If this
occurs, press the ON/STAND-BY button to enter the power
stand-by mode and then turn the power on again.
"
If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
"
If a disc is damaged, dirty, or loaded upside down, the disc will
skip.
Auto power on function:
When you press any of the following buttons, the unit turns on.
"
CD/VIDEO CD (CD) button (main unit and remote control): The
unit turns on and the "CD/VIDEO CD" function is activated.
"
/ ( SELECT/RESUME) button (main unit and remote
control): The unit turns on and playback of the last function starts
(CD/VIDEO CD, TAPE, TUNER, GAME).
! Various disc functions
Function Main unit Remote
control
Operation
Play Press in the stop
mode.
Stop Press in the playback
mode.
Pause Press in the playback
mode. Press the /
( SELECT/RE-
SUME) button to re-
sume playback from
the paused point.
Track up/
Track down
Press in the playback
or stop mode.
(One disc
only)
If you press the button
in the stop mode,
press the / (
SELECT/RESUME)
button to start the de-
sired track.
Fast for-
ward/Fast
reverse
Press and hold down
in the playback mode.
(One track
only)
Release the button to
resume playback.