Sharp CD-G7500V - Programmed Play

04/3/23 CD-G7500V(Z)E3.fm
E-30
ENGLISH
TINSZA101AWZZ
4
CD-G7500V
CP-G7500
Disc Playback
! Programmed play
You can choose up to 32 selections for playback in the order you
like.
To cancel the programmed play mode:
Whilst in the stop mode and the "MEMORY" indicator is lit, press the
CLEAR/DIMMER button on the remote control. The "MEMORY"
indicator will disappear and all the programmed contents will be
cleared.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indica-
tor will be displayed. Then follow steps 1 - 6 to add tracks. The new
tracks will be stored after the last track of the original programme.
To check which tracks are programmed:
Whilst the unit is stopped in the programmed play mode, press the
or button.
Notes:
"
When a disc with programmed tracks is ejected, the programme
is automatically cancelled.
"
Even if you press the ON/STAND-BY button to enter the stand-by
mode or change the function from CD/VIDEO CD (CD) to
another, the programmed selections will not be cleared.
"
During the programme operation, random play is not possible.
"
During programmed play, the DIRECT PLAY button will not work.
"
When the MEMORY/SET (MEMORY) button is pressed in P.B.C.
mode, it will be cancelled automatically and the unit will be
switched to the programme mode.
1
Whilst in the stop mode, press
the MEMORY/SET (MEMORY)
button to enter the programming
save mode.
2
Press one of the 1 - 5 buttons
to select the desired disc.
Selected disc number
3
Press the direct search buttons
on the remote control to select
the desired track.
Selected track number
You can also select a track by pressing the or button.
4
Press the MEMORY/SET (MEMO-
RY) button to save the track
number.
5
Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be
programmed.
If you make a mistake, the programmed tracks can be cleared
by pressing the CLEAR/DIMMER button.
6
Press the ( /RETURN) button.
The total number of memory will ap-
pear.
7
Press the / ( SELECT/RESUME) button to start
playback.
To clear the programmed selections:
Press the CLEAR/DIMMER button on the re-
mote control whilst the "MEMORY" indicator
is flashing.
Each time the button is pressed, one track will
be cleared, beginning with the last track pro-
grammed.