04/3/23 CD-G7500V(Z)E4.fm
E-38
ENGLISH
TINSZA101AWZZ
4
CD-G7500V
CP-G7500
Tape Recording
Recording on a cassette tape
Before recording:
!
When recording important selections, make a preliminary test to
ensure that the desired material is properly recorded.
!
SHARP is not liable for damage or loss of your recording arising
from malfunction of this unit.
!
The volume and sound controls can be adjusted with no effect
on the recorded signal (Variable Sound Monitor).
!
For recording, use only normal tapes. Do not use metal or
CrO tapes.
!
Recording can be operated in the TAPE 2 compartment. The
TAPE 1 is for playback only.
Erase-prevention tab of cassette tapes:
!
When recording on a cassette tape, make sure that the erase-
prevention tabs are not removed. Cassettes have removable
tabs that prevent accidental recording or erasing.
!
To protect the recorded sound, remove the tab after recording.
Cover the tab hole with adhesive tape to record on the tape with-
out the tab.
Side A
Tab for side B
Tab for side A
To Next Page
Loading...
