Sharp CD-G7500V - Tape Playback; Listening to a Cassette Tape (TAPE 1 or TAPE 2)

04/3/23 CD-G7500V(Z)E4.fm
E-34
ENGLISH
TINSZA101AWZZ
4
CD-G7500V
CP-G7500
Tape Playback
Listening to a cassette tape (TAPE 1 or TAPE 2)
" Tape 1 playback
Auto power on function:
When you press any of the following buttons, the unit turns on.
!
TAPE (1 2) button (main unit and remote control): The unit
turns on and the "TAPE" function is activated.
!
/ ( SELECT/RESUME) button (main unit and remote
control): The unit turns on and playback of the last function starts
(CD/VIDEO CD, TAPE, TUNER, GAME).
Before playback:
!
For playback, use normal or low-noise tapes for
the best sound. (Metal or CrO tapes are not rec-
ommended.)
!
Do not use C-120 tapes or poor-quality tapes, as
they may cause malfunctions.
!
Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TAPE (1 2) button to select TAPE 1.
3
Open the cassette com-
partment by pushing the
area marked " ".
4
Load a cassette into the
TAPE 1 cassette compart-
ment with the side to be
played facing toward you.
5
Press the / ( SE-
LECT/RESUME) button to
start playback.
Tape play indicator
3
SHARP TINSZA101AWZZ (Z)