Sharp CD-G7500V - Timer and Sleep Operation

04/3/23 CD-G7500V(Z)E5.fm
E-41
ENGLISH
TINSZA101AWZZ
CD-G7500V
CP-G7500
Advanced Features
Timer and sleep operation
Timer playback:
The unit turns on and plays the desired source (video CD, CD, MP3
disc, tuner, tape) at the preset time.
Timer recording:
The unit turns on and starts recording from the tuner at the preset
time.
Using the once timer and daily timer in combination:
For example, use the once timer to record a radio programme, and
use the daily timer to wake up.
Note:
When set times for the daily timer and once timer overlap, the once
timer takes priority. Allow an interval of at least 1 minute between
operations.
! Timer playback or timer recording
Before setting timer:
This unit has 2 types of timer: ONCE TIMER and DAILY TIMER.
Once timer: Once timer play or once timer recording works for
one time only at a preset time.
For example, if you are away but want to record a programme on a
radio station.
Daily timer: Daily timer play or daily timer recording works at
the same preset time every day.
For example, set the timer as a wake-up call every morning.
1 Set the daily timer (pages 41 - 43).
2 Set the once timer (pages 41 - 43).
Start
Daily timer
Once timer
1 minute or more
Stop Start Stop
1 Check that the clock is set to the correct time (refer to page 18).
If it is not set, you cannot use the timer function.
2 For timer playback: Load a cassette or discs to be played.
For timer recording: Load a cassette for recording in the TAPE
2 cassette compartment.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press the or button to se-
lect "ONCE" or "DAILY", and press the MEMORY/SET but-
ton.
Set the unit to the correct time if "ONCE" or "DAILY" does not
appear.