Sharp CD-G7500V User Manual

E-43
ENGLISH
Advanced DVD Features
CD-G7500DVD (S)
TINSZA159AWZZ
CD-G7500DVD
CP-G7500
Programme playback
H
Chapter programmed playback
You can choose up to 24 favorite chapters for playback in the order you like
using this function. (Title cannot be programmed)
1 Whilst a disc is stopped,
press the MEMORY/
DIMMER button to display
the programme screen.
2 Use the cursor or button
to select the desired title and
then press the ENTER button.
3 Use the cursor or button to select the desired chapter
and then press the ENTER button.
I Selected chapter will be register on confirmation area.
I Repeat steps 2 - 3 for another chapter.
I To clear the programmed chapter, press cursor
, or button to
select unwanted number in confirmation area and press the CLEAR/
DISPLAY button. Press
1 button to go back to selection area.
4 Press the 0 button to start play.
Adding chapters into the programme:
Follow steps 1 - 3, the new chapter number will be added after last number of
original programme.
To clear the programme:
1. Whilst in the stop mode, press MEMORY/DIMMER button.
2. To clear all programme, press and hold down the CLEAR/DISPLAY button
for more than 3 seconds whilst in the confirmation area.
Notes:
I Direct search button [1] to [0] can be used to select the title and chapter.
I Disc without title or chapter registered cannot be programmed.
I To programme other chapters sequentially, use the direct search buttons to
select and press the ENTER button.
I Programme cannot be executed during playback or in pause mode.
I To discontinue the programme, press MEMORY/DIMMER button.
I To play the same programme again, press MEMORY/DIMMER button and
then press 0 button.
I Chapter from different title cannot be programme at the same time.
RRMCGA015AWSA
Cursor
Selection area
Confirmation area
*CD-G7500DVD(EN)40-44 05.1.13, 14:4343

Sharp CD-G7500V Specifications

General

Brand	Sharp
Model	CD-G7500V
Category	Stereo System
Language	English