45
CD-SW340H
2008/April/18 CD-SW340H_AUS
References
Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
General
(*) This power consumption value is obtained when the
demonstration mode is cancelled in the power stand-by mode.
Refer to page 11 to cancel the demonstration mode.
Cassette deck
Power source
AC 220 - 240 V ~ 50 Hz
Power consumption
Power on: 175 W
Power stand-by: 0.6 W (*)
Dimensions
Width: 260 mm (10 - 1/4")
Height: 332 mm (13")
Depth: 324 mm (12 - 7/8")
Weight
9.9 kg (21.8 lbs.)
Output power
Front Speaker:
MPO: 400 W (200 W + 200 W) (10% T.H.D)
RMS: 270 W (135 W + 135 W) (10% T.H.D)
RMS: 180 W (90 W + 90 W) (0.9% T.H.D)
Subwoofer:
MPO: 400 W (10% T.H.D)
RMS: 250 W (10% T.H.D)
RMS: 190 W (0.9% T.H.D)
Output terminals
Front Speakers: 6 ohms
Subwoofer: 12 ohms
Headphones: 12 ohms
(recommended: 32 ohms)
Input terminals
Audio In (audio signal):
250 mV/47 k ohms
Frequency range
FM: 87.5 - 108.0 MHz
AM: 522 - 1,620 kHz
Type
5-disc multi-play compact disc player
Signal readout
Non-contact, 3-beam semiconductor laser
pickup
D/A converter
Multi bit D/A converter
Frequency
response
20 - 20,000 Hz
Dynamic range
90 dB (1 kHz)
Frequency
response
50 - 14,000 Hz (normal tape)
Signal/noise ratio
55 dB (TAPE 1, playback)
50 dB (TAPE 2, recording/playback)
Wow and flutter
0.3% (WRMS)
To Next Page
Loading...
Need help?
General
