Sharp DV-NC70W - A-B Repeat

97
GB
Repeat Playback
/
PLAY
STOP
OPEN/
CLOSE
OPERATE
VCR/DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE
DVD MENU
DISPLAY
EJECT
FUNCTION
CONTROL
PROG/
REPEAT
CLEAR
RETURN
REV FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
VCR DVDAM/PM
INPUT SELECT
PAUSE/STILL
REC
VCR/DVD COMBINATION
SLOW
CH
VCR DVD
SKIP
DPSS
AUDIO
OUTPUT
ANGLE
PROG
DV- NC70
DV- NC70X
G-CODE
DV- NC70W
DVD
DVD
C D
C D
A-B Repeat
A-B repeat allows you to repeat specified section on the disc.
1 Press (REPEAT) three times while a disc is playing.
2 While you are playing a disc, press ENTER when you reach the
start of the section to be repeated.
3 While the disc is playing the same chapter/track, press ENTER
again when you reach the end of the section to be repeated.
• The A-B repeat begins from the point where you specified in
step 2.
• Press
(REPEAT) to turn off the “ ” indicator when returning
to regular playback.
• To cancel A-B repeat, press
ËË
ËË
Ë STOP, TITLE or DVD MENU.
• A-B repeat can only be used within the same title/track.
(On some DVD discs, A-B repeat is restricted to the same chapter.)
If the title/track finishes before specifying the ending location (B), the
location where the title/track finishes will be set as the ending location (B).
• The A-B repeat function cannot be used during programmed playback.
• If the DVD Front Panel display does not show the elapsed playback time
while a disc is playing, A-B repeat playback cannot be used for that disc.
• The A-B repeat function does not operate in scenes where different
camera angles are recorded.
• The A-B repeat function cannot be used on VIDEO CDs with PBC
mode playback.
• Repeat playback cannot be used during programmed playback.
DVD
A
B
C D
C D
VIDEO
VIDEO