1-12-2
E9656FIS
< DVD Section >
Note: If an error occurs, a message with the error number appears on the screen.
Recording Error
You cannot record on this disc as
Power Calibration Area is full.
E35
Error No.
Error message
Message Solution
No.
Error
Error Description Priority
Can not record on this disc.
the recording requirements.
ensure the disc status satisfies
This program is not allowed
to be recorded.
You cannot record copy
prohibited programs.
This program is not
recordable in Video mode.
Set "DVD-RW Recording
Format" to "VR mode".
Insert the recordable disc
,
and
1 An error occurs during data reading. -
2
Unit Ready.
There is no reply for 15 seconds in Test
-
3
three times.
Cannot write the data after trying to write
-
4 An error occurs with OPC. -
5 During recovery in a record. -
6
a record three times.
An error occurs even if it do recovery of
-
7 An error occurs in a format. -
8 It cannot start an encode. -
9
doing an encode.
There is not NV_PCK/RDI_PCK in data
-
10
Encode Pause condition continued for
10 minutes.
-
11
normal REC condition for 10 minutes.
Encode Pause condition continued for
-
12
StreamID of RDI/VIDEO.
Differ in an address and do not get
-
13 It is a reply that "ATAPI is not readable." -
14
SMALL VMGI.
Cannot write the data after recovering
-
15
Track.
Cannot write the data after DVD-R Reverse
-
16 An error occurs in Finalize Close. -
17 An error occurs in Rec Stop Close. -
18 An error occurs in PCA Full
(
DVD_R
)
.-
19 Safety Stop occurs during editing. -
20 High Speed Disc. 2
21 The disc which is not formatted. 5
22 The disc that Disc Error occurred. 3
23 The -R Disc of VR Mode. 6
24
The disc except DVD-R/RW or
DVD-R finalized disc
1
25 During the Macrovision picture input. 11
26 During the CGMS picture input. 12
27
once
)
input.
(
Video Format Disc
)
During the CGMS picture
(
possible a record
12
To Next Page
Loading...
