Sharp EL-9900 - Using List Table to Enter or Edit Lists; How to Enter the List

143
Chapter 9: List Features
2 RclLD RclLD natural number (0-9)
Recall the stored group of lists for use.
Any current list data (not stored in L_DATA) is overwritten.
Example
1. Press @ l and
select C 2.
2. Enter the number to recall
and press E.
“Done” will appear and the
current lists will be overwritten by the recalled list group.
7. Using List Table to Enter or Edit Lists
You can use List Table in the STAT menu to easily access the contents of the lists.
Though the STAT menu was originally designed for Statistics function calculations, the
List Table is very useful for entering or editing list items.
How to enter the list
1. Press S A E.
The list table will appear.
The first column indicates
the order number of each
list, and the 2nd column
corresponds to the list L1, the 3rd to the L2, and so on.
2. Move the cursor to the target cell and enter the appropriate
value.
The value will appear on the bottom line.
3. Press E.
The value will enter the cell and the cursor move down to the
next cell.
* “--------” indicates the end of the list. When you enter the value,
“--------” goes down to the next cell.