170
■
Zero skip
You can program whether or not to skip “0” in each report.
Procedure
Program each item as follows:
• CLERK (Use the selective entry)
SKIP: Skips those data that are “0” in the clerk report.
NOT SKIP: Does not skip those data that are “0” in the clerk
report.
• CASHIER (Use the selective entry)
SKIP: Skips those data that are “0” in the cashier
report.
NOT SKIP: Does not skip those data that are “0” in the
cashier report.
• TRANSACTION (Use the selective entry)
SKIP: Skips those data that are “0” in the transaction report.
NOT SKIP: Does not skip those data that are “0” in the transaction report.
• DEPARTMENT (Use the selective entry)
SKIP: Skips those data that are “0” in the department report.
NOT SKIP: Does not skip those data that are “0” in the department report.
• PLU (Use the selective entry)
SKIP: Skips those data that are “0” in the PLU/EAN report.
NOT SKIP: Does not skip those data that are “0” in the PLU/EAN report.
• HOURLY (Use the selective entry)
SKIP: Skips those data that are “0” in the hourly report.
NOT SKIP: Does not skip those data that are “0” in the hourly report.
• DAILY NET (Use the selective entry)
SKIP: Skips those data that are “0” in the daily net report.
NOT SKIP: Does not skip those data that are “0” in the daily net report.
■
Hourly report
You can program the memory type and the starting time for the hourly report.
Procedure
Program each item as follows:
• MEMORY TYPE (Use the selective entry)
30MIN: Selects the 30-minute type.
60MIN: Selects the 60-minute type.
• START TIME (Use the numeric entry)
Starting time entry (max. 2 digits: 0 to 23)
To Next Page
Loading...
Need help?
General
