206
iSDC Mode
In the iSDC mode, you can save and load the data of your register to and from the server using a WiFi
SD card.
This section describes the items that can be programmed for the iSDC mode, and how to terminate the
communication in the iSDC mode.
For details on the specifi cation of WiFi SD card and the use of iSDC mode, consult your authorized
SHARP dealer.
■
Host preset
Procedure
▼
1.
In the mode selection window, select “9 iSDC MODE”.
▼
2.
Select “2 SETTING”.
▼
3.
Select “1 HOST PRESET”.
The screen continues.
4.
Program each item as follows:
• USER ID (Use the character entry)
User ID for communication service. Up to 12 characters
can be entered.
• PASS (Password) (Use the character entry)
Password for communication service. Up to 16 characters
can be entered.
• SCHEME (Use the selective entry)
Resource URI scheme
HTTP/HTTPS
• HOST (Use the character entry)
Server host name. Up to 30 characters can be entered.
To Next Page
Loading...
Need help?
General
