Sharp ER-A411 User Manual

180
■
Scanner
Procedure
Program each item as follows:
• CHANNEL# (Use the numeric entry)
Channel number (0 through 4)
When you program as “0”, no RS-232 channel is assigned.
• BAUD RATE (Use the selective entry)
Transmission speed (baud rate)
19200 bps/9600 bps/4800 bps
• TYPE (Use the selective entry)
Selection of the scanner type
RS-CS CONTROL/RS-CD CONTROL
• DATA BITS (Use the selective entry)
Data bit: 7 bits/8 bits
• PARITY (Use the selective entry)
Parity bit: NON/ODD/EVEN
• STOP BIT (Use the selective entry)
Stop bit: 1 bit/2 bits
• ITF14 (Use the selective entry)
W LENGTH: With length
W/O LENGTH: Without length
■
Online
Procedure
Program each item as follows:
• CHANNEL# (Use the numeric entry)
Channel number (0 through 4)
When you program as “0”, no RS-232 channel is assigned.
■
Clerk key
Procedure
Program each item as follows:
• CHANNEL# (Use the numeric entry)
Channel number (0 through 4)
When you program as “0”, no RS-232 channel is assigned.
■
EFT
Procedure
Program each item as follows:
• CHANNEL# (Use the numeric entry)
Channel number (0 through 4)
When you program as “0”, no RS-232 channel is assigned.

Sharp ER-A411 Specifications

General

Brand	Sharp
Model	ER-A411
Category	Cash Register
Language	English