System Preset
Specifications subject to change without notice: Revision date 10/07 Page 9 of 266
System Preset: 905
Bit Description Data
MRS
Defaults
A520 A530
Tax4 Subtotal is printed on Trans. Reports No/Yes 4/0
Gross Tax4 & Refund Tax4 Totals are printed on Trans. Reports No/Yes 2/0
A
Net Tax4 Total is printed on Trans. Reports No/Yes 1/0
Enter SUM of Selection ----^
0 0
Tax is printed when the Taxable Subtotal = $0.00 Yes/No 4/0
Tax is printed when GST is VAT No/Yes 2/0
B
Tax is printed when Tax = $0.00 No/Yes 1/0
Enter SUM of Selection ----^
0 0
GST Exempt is printed on Trans. Reports No/Yes 4/0
---- ---
C
---- ----
Enter SUM of Selection ----^
0 0
D
Canadian Tax System:
Type10/Type9/Type8/Type7/Type6/Type5/Type4/Type3/Type2/Type1
9/8/7/6/
5/4/3/2/
1/0
Enter SUM of Selection ----^
5 5
NOTE:
• 905-C is related to 905-D the Canadian Tax System
System Preset: 906
Bit Description Data
MRS
Defaults
A520 A530
Dept. & PLU/UPC Codes are printed Yes/No 4/0
A
PLU/UPC (EAN) Stock System:
Entry is Inhibited/Error Message and Operation continues/Allowed
2/1/0
Enter SUM of Selection ----^
0 0
Bottle Return Function is Enabled Yes/No 4/0
Hash Dept. is Enabled Yes/No 2/0
B
---- ---
Enter SUM of Selection ----^
0 0
C
Multiplication System:
Split-Price/Successive Multiplication/Multiplication
2/1/0
Enter SUM of Selection ----^
2 2
PLU/UPC (EAN) Price Look Up at Refund Entry No/Yes 4/0
Presetting of the Consecutive No. is Enabled No/Yes 2/0
D
Fractional Qty System is enabled (3 decimal places) Yes/No 1/0
Enter SUM of Selection ----^
0 0
NOTE:
• 906-D must not be changed until after totalizers are reset (Qty 0 Æ 0.000 & vice-versus).
• Fractional entries are disabled when a SCALE is enabled in PGM2 Job #2690 programming.
• 906-D must be set = 1 to enable “SCALE”.
To Next Page
Loading...
