Sharp ER-A520 - Page 16

ER-A520/A530 Dealer Knowledge Book
Page 10 of 266 Specifications subject to change without notice: Revision date 10/07
System Preset: 907
Bit Description Data
MRS
Defaults
A520 A530
---- ---
Fixed = 0 ---
A
---- ---
Enter SUM of Selection ----^
0 0
---- ---
UPC (EAN) Code Printing on Journal No/Yes 2/0
B
UPC (EAN) Code Printing on Receipt No/Yes 1/0
Enter SUM of Selection ----^
0 0
X Report is Enforced prior to Ind./All Cashier CCD Yes/No 4/0
---- 2/0
C
Minus Dept. and PLU/UPC (EAN) items are Enabled Yes/No 1/0
Enter SUM of Selection ----^
1 1
CCD Compulsion on ALL Server 0
For Individual Server CCD 1
D
Non-Compulsory CCD 2
Enter SUM of Selection ----^
0 0
NOTE:
• To enable Coupon PLU items 907-D must be set = 1
System Preset: 908
Bit Description Data
MRS
Defaults
A520 A530
GT1 is printed on the Trans.-Z Report No/Yes 4/0
GT2 is printed on the Trans.-Z Report No/Yes 2/0
A
GT3 is printed on the Trans.-Z Report No/Yes 1/0
Enter SUM of Selection ----^
0 0
GT1 is printed on the Trans.-X Report Yes/No 4/0
GT2 is printed on the Trans.-X Report Yes/No 2/0
B
GT3 is printed on the Trans.-X Report Yes/No 1/0
Enter SUM of Selection ----^
0 0
VOID-mode operations affect the Hourly Report Yes/No 4/0
X//Z1 Reports may taken in X2/Z2 Mode No/Yes 2/0
C
Consecutive No. is Reset upon a Trans.-Z Report Yes/No 1/0
Enter SUM of Selection ----^
0 0
X/Z Report Printing: Journal only/Receipt & Journal 4/0
---- ---
D
Trans.-Z1 Report resets the GT Yes/No 1/0
Enter SUM of Selection ----^
0 0
NOTE:
• 908-D: The X/Z Report printing option does not apply to Individual Cashier Report