ER-A520/A530 Dealer Knowledge Book
Page 254 of 266 Specifications subject to change without notice: Revision date 10/07
Preparing the PC Environment
The ER-A520/530 Logo Downloader Utility is provided as two separate files that are self-extracting and
contain all the necessary elements for installation of the program.
1. Using Windows Explorer, create a temporary folder to copy the following files:
(1) LogoLoader.cab
(2) Setup.exe
(3) Setup.lst
2. While in Explorer, double click each file and its contents will be extracted within the same folder.
3. To install the LOGO utility, locate the SETUP.exe and double click to initiate the installation process.
4. The installation files will be copied to the PC. (Fig. 1)
5. The installation process will begin when you click on
the Installation Icon. (Fig. 3)
6. You will be prompted to select the desired directory to
install the utility. (Fig. 4)
Recommendation: Use the default setup to avoid
overwriting other Sharp Utilities.
Figure 1
Figure 2
Figure 3
To Next Page
Loading...
