[JOB#944] MRS = 0000
PGM2 secret code presetting
NOTE: When the secret code "0" is programmed, the secret code
entry is be inhibited.
[JOB#945] MRS = 0000
The assignment of RS232 channel by each devices
#945-A: 1. Channel No. for online
1. Channel No. for online 945-A
Channel No. 0 to 7
#945-B: Not used (Fixed at "0")
#945-C: 1. Channel No. for scale
1. Channel No. for scale 945-C
Channel No. 0 to 7
#945-D: Not used (Fixed at "0")
∗ 0 = No connect
1 to 7 = Channel number
[JOB#946] NOT USED: MRS = 0000
[JOB#948] MRS = 000000
PROGRAMMING OF TRAINING CLERK NO.
XXX: Clerk 1
YYY: Clerk 2
[JOB#949] MRS = "TRAINING"
THE TRAINING MODE’S TITLE
Characters can be entered by using alphabetic keys or numeric keys.
Please refer to section 3.
[JOB#950] MRS = STANDARD KEY LAYOUT
Free key layout (Except for department keys and direct PLU keys.)
[JOB#951] MRS = STANDARD KEY LAYOUT
Free key layout (department keys and direct PLU keys)
• Programming of the keys to be dept keys or direct PLU keys on
the keyboard.
• Key No. is assigned to each key which is supposed to be dept.
Key or direct PLU key by depressing the key after entering the key
No.
• Those keys programmed by this job No. will be dept. keys if dept.
code is assigned, and will be direct PLU keys if PLU code is
assigned in the PGM2 mode.
FUNCTION KEY LIST (In the ER-A570, the shaded section
( ) is not used.)
Key No. KEY KEY TEXT
1 0 KEY 0 KEY
2 1 KEY 1 KEY
3 2 KEY 2 KEY
4 3 KEY 3 KEY
5 4 KEY 4 KEY
6 5 KEY 5 KEY
7 6 KEY 6 KEY
8 7 KEY 7 KEY
9 8 KEY 8 KEY
10 9 KEY 9 KEY
11 00 KEY 00 KEY
12 000 KEY 000KEY
13 DECIMAL POINT . KEY
14 CLEAR CLEAR
15 ⊗ X
16 SUB TOTAL SBTL
17 TOTAL TOTAL
18 DIFF ST DIF ST
19 # #
20 NO SALE NS
21 SCALE SCALE
22 OPEN TARE OPN TR
23 PLU PLU
24 G.C. COPY GCCOPY
25 L1 L1
26 L2 L2
27 L3 L3
TL
944
XXXX
4 digits
0
X
TL
Job#
ABCD
0
X
TL
948 XXXYYY
X
TL
949
Character key
(8 chra.)
Space
X
To Next Page
Loading...
