[JOB#2620, 2621]
STACK REPORT 1 and 2
JOB#2620: STACK REPORT 1
JOB#2621: STACK REPORT 2
XX: JOB#
SSSSSS: Start code
EEEEEE: End code
JOB# REPORT NAME TYPE
00 General
10 DEPT./GROUP
13 DEPT. All group
20 PLU RANGE
23 PLU group total
24 PLU stock RANGE
27 PLU zero sales
28 PLU minimum stock RANGE
30 Transaction
31 CID
32 Commission sale
33 Tax
34 Chiff
40 All clerk
60 Hourly RANGE (only X report)
70 Daily net
80 GLU RANGE
82 Balance
[∗∗]
Max. 70 step are programmable. "1 step" means the memory size
used for one no range type JOB#.
The RANGE-1 type JOB# means "8 steps".
The RANGE-2 type JOB# means "16 steps".
The range type JOB# means "8 steps".
For example)
The memory size for programming JOB#00, 20 and 50 is 10 steps.
(ie. 1 step for JOB#00, 8 step for JOB#20, and 1 step for JOB#50. )
[JOB#2630, 2631, 2632]
SECRET CODE PROGRAMMING
#2630: PGM1 mode
#2631: X1/Z1 mode
#2632: X2/Z2 mode
∗ If "0" is entered, "compulsory secret code entry" is canceled.
MRS = 0
[JOB#2641]
MESSAGE TEXT PROGRAMMING
X: Message No. = 1~50
(In the ER-A570, the shaded section (
) of the MESSAGE is not
used.)
Message
No.
Description MRS
1 Registration error ENTRY ERROR
2 Misoperation error MISOPERATION
3
Desired code is not
programmed yet.
NO RECORD
4 Paper empty PAPER EMPTY
5 Secret code error SECRET CODE
6 Code is not free NOT FREE
7 Memory is full MEMORY FULL
8 Insert slip paper INSERT SLIP
9
The clerk has enterd a code for
which he or she is not
authorized.
NO AUTHORITY
10 (reserved)
11
Compulsory of pushing the
SBTL key
SBTL COMPUL.
12 Compulsory of tendering TEND COMPUL.
13 Compulsory of PB entry PB COMPUL.
14 Compulsory of SCM entry SCM COMPUL.
15 Compulsory of guest# entry GUEST COMPUL
16 (reserved)
17 IRC non reset error NON RESET
18 Retry message RETRY ?
19 After Z1 report ENTRY ERR Z
20 KP off line OFF LINE
21 KP motor lock MOTOR LOCK
22 Overlaped clerk error CLK ERROR
23 Cashier resetting over error ENTRY ERR CA
24 Clerk reseting over error ENTRY ERR CK
25 Set slip paper again SLIP SET
26 File type error TYPE ERROR
27 Power off POWER OFF
28 In line busy IRC BUSY
29 In line error IRC ERROR
30
Tendering compulsory error for
tip
TIP ERROR
31 (reserved)
32
The clerk key is not pushed or
inserted.
NOT ASSIGNED
33
The clerk key is changed in the
transaction.
NOT CHANGE
34 Overflow limitation OVER LIMIT.
35 The open price entry is inhibited. INH. OPEN PR
36 The unit price entry is inhibited. INH. UNIT PR
37
The direct non-tendering
finalization after previous tender
entry is inhibited.
NOT NON-TEND
38 Read error of Scale SCALE ERROR
2620
2621
XX
SSSSSS
ST TL
EEEEEE
All delete
No range
Next JOB# (max.=20)
X
X X
2630,2631,2632 XXYY
TL
0
X
To Next Page
Loading...
