Message
No.
Description MRS
39
Power-off duaring VP of
Euro/French check and Slip
paper feed
P-OFF IN VP
40 KP buffer full BUFFER FULL
41 KP hard error HARD ERROR
42 Open store OPEN STORE
43 Close store CLOSE STORE
44 Sending of Z data SENDING
45 Sign on SIGN ON
46 Master down MASTER DOWN
47 Back up master down BACKUP DOWN
48 Guidance for check# entry CHECK#
49 (reserved)
50 (reserved)
51 Weight on scale WEIGHT
52 (reserved)
53 (reserved)
54 Entry tare weight ENTR TARE WT
55 (reserved)
56 (reserved)
57 (reserved)
58 (reserved)
59 (reserved)
60 T-LOG buffer not empty T.LOG REMAIN
61
Desired code is not
programmed yet. It is used in
Learning function.
NO RECORD
62
Entry of Price and Dept No.
(For Learning function)
PRICE → DEPT
63
Entry of Price and Dept No. (For
Price change function)
PRICE & DEPT
64 Entry of Department No. DEPT #
65 Entry of NameNAME NAME
66 Entry of AddressADDRESS ADDRESS
67 REG Buffer full BUFFER FULL
68 T. log Full T.LOG FULL
69 (reserved)
70 Price entry at EAN refund ENTER PRICE
71 EAN file is full EAN FULL
72 EFT ERROR EFT ERROR
73 EFT BREAK EFT BREAK
74 Delete not-worked EAN file N/W EAN DEL.
75 Delete not-worked Customer file N/W CST DEL.
Amessage is 12 characters
Characters can be entered by using character keys or numeric keys.
the key entery sequence for entering one character by numeric keys
is as follows:
XXX → 00 key XXX: Character code (3 digits)
Please refer to section 3
[JOB#2642]
VP TEXT PROGRAMMING
X: Position code = 1 to 3
Characters can be entered by using character keys or numeric keys.
the key entery sequence for entering one character by numeric keys
is as follows:
XXX → 00 key XXX: Character code (3 digits)
Please refer to section 3
1 Block max. 21 characters
MRS = "FOR DEPOSIT ONLY "
"FOR DEPOSIT ONLY "
"FOR DEPOSIT ONLY "
[JOB#2643]
SLIP TEXT PROGRAMMING
X: Position code = 1 to 3
Characters can be entered by using character keys or numeric keys.
the key entery sequence for entering one character by numeric keys
is as follows:
XXX → 00 key XXX: Character code (3 digits)
Please refer to section 3
1 Block max. 21 characters
MRS = "Space"
"Space"
"Space"
[JOB#2644]
GUIDANCE TEXT PROGRAMMING FOR LEAD THROUGH PRO-
GRAMMING
XX: Guidance No. = 1~13
Characters can be entered by using character keys or numeric keys.
the key entery sequence for entering one character by numeric keys
is as follows:
XXX → 00 key XXX: Character code (3 digits)
Please refer to section 3
1 text max. 12 characters
Guidance No. MRS
1 ENTER DEPT#
2 PRICE
3 PROGRAMMING
4TAX
5HALO
6TEXT
7 COMMISSION
8 GROUP
9 PRINT STAT.
To Next Page
Loading...
