Sharp ER-A570

4. Service mode programming
The following are the key operation required for programming.
Details of [A][B][C][D] will be discussed at each item description.
★ mark is MRS setting.
[JOB #901]:MRS=0102
#901-A: Not used (Fixed at "0")
#901-B: Tax system
1. TAX system 901-B
Auto TAX 1~6 0
Auto VAT 1~6 1 ★
Manual VAT 1~6 2
Manual VAT 1 3
Manual TAX 1~6 4
Auto VAT 1~3 and Auto TAX 4~6 5
#901-C: 1. Rounding system
1. Rounding system 901-C
Normal 0 ★
SWEDEN 1
DENMARK 4
#901-D: 1. TAB setting
1. TAB setting 901-D
0.0 1
0.00 2 ★
0.000 3
[JOB#902] MRS=0000
#902-A: 1. Choice of inline option
2. INLINE (SRN in-line) 902-A
★
No 0
Yes 1
#902-B: 1. Choice of kitchen printer
1. Kitchen printer (ER-03RP/04RP) 902-B
★
No 0
Yes 1
#902-C: 1. Coice of slip printer (ER-31SP)
1. Coice of slip printer (ER-31SP) 902-C
No 0 ★
Yes 2
#902-D: 1. EFT terminal (For Germany)
2. Real clerk key system
1. EFT terminal 2. Clerk key 902-D
No
4 bit key 0 ★
8 bit key 2
Yes
4 bit key 4
8 bit key 6
[JOB#903] MRS=4270
#903-A: 1. SIO loader dumper baud rate
1. Baud rate (bps) 903-A
300 0
1200 1
2400 2
4800 3
9600 4 ★
19200 5
#903-B: 1. Symbol of scale
1. Symbol of scale 903-B
"LB" 0
"KG" 2 ★
#903-C: 1. Scale entry system
2. Entry of tare
3. Unit of weight for the scale
1. Scale entry
system
2. Entry of tare 3. Unit of
weight for
the scale
903-C
Manual Disallowed 2id (3id) + 2dd 0
1id (2id) + 3dd 1
Allowed 2id (3id) + 2dd 2
1id (2id) + 3dd 3
Automatic Disallowed 2id (3id) + 2dd 4
1id (2id) + 3dd 5
Allowed 2id (3id) + 2dd 6
1id (2id) + 3dd 7 ★
#903-D: Not used (Fixed at "0")
[JOB#904] MRS=0000
#904-A: 1. Printing of date
1. Printing of date 904-A
★
Yes 0
No 4
#904-B: 1. Printing of consecutive No.
1. Printing of consecutive No. 904-B
★
Yes 0
No 4
#904-C, D: Not used (Fixed at "00")
XXX
TL
(Job#)
[A] [B] [C] [D]
Numeric entry
4 digits max
X
0
 4 