Sharp ER-A570

Table
No.
File name
RECORD BLOCK
Label
size
Data
size
MRS Max. #1 MRS Max. #2
116 Consolidation 0 32 (113) 0 1 0 8
117 Daily net receiveLabel 0 32 (113) 0 1 3 0
118 Receive 0 32 (113) 0 1 0 8
119 Reg. buffer 80 255 1 1 0 48
120 KP buffer 0 255 (119) 0 1 0 48
121 Over lapped clerk 0 255 (119) 0 6 (86) 0 48
122 GLU/PBLU buffer 80 255 (119) 1 1 0 48
123 B.T./B.S. buffer 80 255 (119) 1 1 0 48
124 GLU/PBLU receive buffer 0 255 (119) 0 1 0 48
125 GLU/PBLU save buffer 0 255 (119) 0 1 0 48
<Label:Data>
126 GLU/PBLU 1 50:1350 ∗∗∗:∗∗∗ 11 845
127 GLU/PBLU 2 0:0 ∗∗∗:∗∗∗ 01 850
128 KP Preset 0 9 0 1 1 3
129 Text 0 9 (128) 0 1 0 12
130 Message text 75 75 1 1 1 12
131 Guidance text 21 21 1 1 1 12
132 Miscellaneous text 304 304 1 1 2 8
133 Customer master 0:0 ∗∗∗:∗∗∗ 0 1 13 19
134 T-LOG buffer 0 ∗∗∗ 01 048
135 T-LOG receive buffer 0 255 (119) 0 1 0 48
136 Over lapped clerk GLU/PBLU edit buffer 0 255 (119) 0 6 (86) 0 48
137 Over lapped clerk Mix&Match sales Q’ty buffer 0 255 (56) 0 6 (86) 0 30
138 Mix&Match Discount buffer 0 255 (119) 0 1 0 48
(#1) : Same as the number of record of table no. N
(#2) : Same as the number of block of table no. N
[JOB#996, 998] SIO data send/receive
(ECR↔ECR, ECR↔ER-02FD)
Note: When this JOB is executed at the master with the satellite
machine operating in the inline system, data may not be saved
in a floppy disc. Therefore this JOB should be used only when
all the other machines in the inline system are not used.
[JOB#996] SIO data send
NK : 0 = SSP
1 = Standard RAM+01RA/02RA
2 = 01MB (0.5MB)/02MB (0.5MB: 1st half)
3 = 02MB (0.5MB: 2nd half)
[JOB#998] SIO data receive
[JOB#989] Resetting of all counter and totalizer
All counter, totalizer, stock counter, all GTs, and all Z counter are
reset.
996 NK
All data
TL
X
998
TL
X
TL989 X
 18 