Sharp ER-A570

CHAPTER 3. OP X/Z, X1/Z1,X2/Z2
MODE
The following categories of reports can be printed by the ECR.
1) OP X/Z reports (individual clerk reports)
2) X1/Z1 reports (Daily sales total X and Z reports)
3) X2/Z2 reports (Periodic total X and Z reports)
To print reports, use the following key entry sequence
JOB# Range is required
TL
Reading
Resetting
X
SLIP
X/Z MODE JOB# LIST
MODE ∗ 1
OP X/Z X1/Z1 X2/Z2 ∗ 3 DATA FOR
REPORT NAME X Z X1 Z1 X2 Z2 JOB# READING NOTE
GENERAL 0 0 0 0 00 —
DEPT/GROUP 0 0 10 —
IND. GROUP 0 0 12 GROUP No
GROUP TOTAL 0 0 13 —
PLU BY RANGE 0 0 0 0 20 PLU CODE ∗ 2
PLU BY DEPT 0 0 0 0 21 DPT CODE
PLU IND. GR. 0 0 22 GROUP No
PLU GR. TL 0 0 23 —
PLU STOCK 0 24 PLU CODE ∗ 2
PLU ZERO SALES 0 0 27 ALL
PLU ZERO SALES BY DEPT 0 0 27 DPT CODE
PLU MINIMUM STOCK 0 28 ∗ 2
TRANSACTION 0 0 30 —
TL-ID 0 31 —
COMMISSION SALES 0 0 32 —
TAX 0 0 33 —
CHIFF 0 34 —
ALL CLERK 0 0 0 0 40 —
IND. CLERK 00000041 —
HOURLY (ALL)
(RANGE)
00 60
060∗2
DAILY NET 0070
GLU 0 0 80 ∗ 2
GLU BY CLERK 0 0 81
BALANCE 0 0 82
STACKED REP 0 0 0 0 90-91
 46 