Sharp FO-51

Connections
10
Connections
Connecting the handset
Connect the handset as shown and place it on the handset rest.
♦ The ends of the handset cord are identical, so they will go into either
socket.
Make sure the handset
cord goes into the
socket marked with a
handset symbol on the
side of the machine!
Use the handset to make ordinary
phone calls, or to transmit and receive
faxes manually.
1 Grasp the finger hold and open the
operation panel.
2 Flip up the front paper guide .
Note: Do not peel
off or bend this
strip of film.
Removing the packing paper
all.bookPage10Wednesday,November20,200211:24AM