Sharp FO-51

Sending a Fax by Automatic Dialling
35
2. Sending
Faxes
Sending a fax by Speed Dialling
Speed Dialling can be used to dial any number that has been stored for
Automatic Dialling.
1 Load the document(s).
• If desired, press to set the
resolution and/or contrast.
2 Press and then enter the Speed Dial number by pressing the
numeric keys.
• To enter numbers 1 through 9, first
enter 0 and then the number.
3 Check the display. If the name or number shown is correct, press .
(If not, press and then repeat Step 2.)
RESOLUTION/
RECEPTION MODE
SPEED
DIAL
START
STOP
READY TO SEND
SPEED
DIAL
0 8
(Example)
all.bookPage35Wednesday,November20,200211:24AM