Sharp FO-51

67
9. Maintenance
9. Maintenance
Cleaning the scanning glass and rollers
Clean the scanning glass and rollers frequently to ensure the quality of your
transmitted images and copies.
1 Grasp the finger hold and pull up to
open the operation panel.
2 Flip up the green levers on each side of
the white roller.
3 Wipe the scanning glass and rollers
with a cotton pad.
• Make sure that all dirt and stains (such
as correcting fluid) are removed, as dirt
will cause vertical lines on transmitted
images and copies. (If necessary, wipe
with denatured alcohol.)
• Adhesive cellophane tape is useful for
removal of debris from the rollers.
Scanning glass
all.bookPage67Wednesday,November20,200211:24AM