EN-10
HOW TO CHANGE VARIOUS SETTINGS
Enable/disable wireless
LAN adapter
Wireless LAN connection
with a router
1.
Turn the Main Unit power OFF.
2.
more 3 sec.
♪
3.
Select .
♪
Set
♪
4.
Select "Function number".
Reverse Forward
or
････
No Function
Enable/disable wireless LAN adapter
Wireless LAN connection with a router
Link settings with a smartphone
Initialization of wireless LAN function
Update
Confi rmation of MAC address
Display wireless LAN network status
AP(Access Point) mode
Set
♪
5.
Please reffer to page 10 - 12 for the detail of
each functions.
6.
Press Power ON/OFF Button to
fi nish the setting.
♪
〜
Turn off
You can change the functions in the table "Type of
setting" below.
♪ ♪
1.
Select at the left step.
2.
Select "Setting number".
♪
Stoppage of wireless LAN function
start the wireless LAN function
3.
Complete
♪
1.
Select at the left step.
2.
After is displayed, press the
Wireless LAN button of the router.
Blink Blink
Once connected, reveiver level will be
displayed.
weak
strong
Light up
A connection error is occuring if is
displayed. Please confirm the router and try
again.
3.
Complete
♪
※
※
※
To Next Page
Loading...
