Sharp FP-S42 - Page 23

EN-21
ENGLISH
Standby Power
When the product’s AC Adapter is inserted in a wall outlet it consumes standby power in
order to operate electrical circuits. To conserve energy, unplug the AC Adapter when the
product is not in use.
Model FP-S40
Power Supply AC Adapter *
1
Rated Input AC 100 - 240 V 50 - 60 Hz 0.9 A
Rated Outlet DC 24.0 V 1.5 A 36.0 W
Fan Speed Adjustment MAX MED LOW
Fan Speed (m
3
/ h) 240 132 48
Rated Power (W) 23 6.4 2.4
Noise Level (dB) *
2
46 34 21
Standby Power (W) 0.3
Recommended Room Size (m
2
) *
3
Up to 30
High Density Plasmacluster Ion
Recommended Room Size (m
2
) *
4
Up to 23
Sensors Odor
Filter Type Two in one HEPA *
5
and Deodorizing
Cord Length (m) Approx. 2.0
Dimensions (mm) 235 (W) × 235 (D) × 372 (H)
Weight (kg) Approx. 3.9
product is placed next to a wall and is running at MAX mode settings
*5 The filter removes more than 99.97% of particles at least 0.3 microns in size (according
to JEM1467).
*6 The recommended room size is appropriate for operating the product at maximum fan
speed. (according to ANSI/AHAM AC-1-2020, GB/T 18801-2022)
*7 This CADR is tested by a third party based on GB/T 18801-2022 “Air Cleaner” Test
Method and is the result of operating at MAX mode setting.
Recommended
Room Size *
6
CADR
Smoke Dust Pollen
AHAM
19 m
2
133 cfm
(226 m
3
/ h)
141 cfm
(240 m
3
/ h)
152 cfm
(258 m
3
/ h)
GB
26 m
2
260 m
3
/ h *
7
FP-S42_40.indb 21FP-S42_40.indb 21 2024/03/15 10:14:272024/03/15 10:14:27