Sharp IG-DL1Y

ENGLISH
E-9
UNIT (Electrode section)
Every 6 months or more often if necessary
Remove dust completely from the tip and root of the electrode of the unit with the
attached unit cleaning brush or commercial cotton swabs.
(About removing the unit, see "How to replace the Plasmacluster Ion Generating Unit" on E-11)
Do not touch the electrode section. (Doing so could lead to injury.)
• Do not transform the electrode section. (Doing so could lead to damage.)
• Do not touch the connection terminals. (Doing so could lead to damage.)
• Please damp the tip of a cotton swab with little water, if the dirt does not come off easily.
MAIN UNIT
Every month or more often if necessary
Wipe with a dry soft cloth.
Use water and a mild detergent. And then, wipe with a wet
cloth. Make sure to dry out the main unit.
<For Stubborn Dirt>
Cleaning brush
Electrode
section
Electrode
Root of the
electrode
[Before maintenance] [After maintenance]
IG-DL1Yen.inddSec1:9IG-DL1Yen.inddSec1:9 2011/09/309:21:032011/09/309:21:03