Sharp IG-DL1Y

E-4
INSTALLATION POSITION
Ensure that the connecting part is inserted all the way in the insertion section of the
stand or the clamp. This product includes a stand and a clamp, enabling two ways
of installation. Check each installation method before installation.
Installation using the stand
①
②
Ensure that the connecting part is inserted all the way in the insertion
section of the stand.
Installation the stand in a stable and level place.
Note:
To remove the unit from the stand, press and hold the both (right and left) installing tabs and
lift.
Ensure that the fi xing tabs of the connecting part are inserted and lock in the stand.
(You can hear a clicking sound.)
Connecting part
Installing tabs
(right and left)
Fixing tabs
(right and left)
Stand
Insertion section
Insert
IG-DL1Yen.inddSec1:4IG-DL1Yen.inddSec1:4 2011/09/309:21:012011/09/309:21:01