Sharp IG-DL1Y

ENGLISH
E-1
ENGLISH
Thank you for purchasing this SHARP Plasmacluster Ion Generator. Please
read this manual carefully before using Plasmacluster Ion Generator.
After reading, keep the manual in a convenient location for future reference.
The information provided in this manual is subject to change without notice.
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS
......................
E-2
• WARNING
............................................................................
E-2
• CAUTIONS CONCERNING OPERATION
...........................
E-2
• INSTALLATION GUIDELINES
.............................................
E-2
PARTS NAME
.....................................................................
E-3
• MAIN UNIT / BACK / DISPLAY
............................................
E-3
• ACCESSORIES
...................................................................
E-3
INSTALLATION POSITION
.............................................
E-4
OPERATION
.......................................................................
E-6
CLEANING AND MAINTENANCE
.................................
E-8
• FILTER
.................................................................................
E-8
• UNIT
.....................................................................................
E-9
• MAIN UNIT
...........................................................................
E-9
PLASMACLUSTER ION GENERATING UNIT REPLACEMENT
..
E-10
HOW TO REPLACE THE PLASMACLUSTER ION GENERATING UNIT
..
E-11
SPECIFICATIONS
...........................................................
E-11
TROUBLESHOOTING
....................................................
E-12
• While IG-DL1Y can remove suspended viruses and other
contaminants, it cannot create a completely sterile environment.
SHARP does not guarantee its ability to prevent microbial infection.
• To enable stable emission of high-density Plasmacluster ions, the
Plasmacluster Ion Generating Unit mounted in IG-DL1Y will need to
be replaced periodically*.
* Replacement is required approximately every 2 years (17,500 hours) when operated
24 hours a day.
IG-DL1Y
will stop operating after about 26 months (19,000 hours)
if the Plasmacluster Ion Generating Unit is not replaced.
IG-DL1Yen.inddSec1:1IG-DL1Yen.inddSec1:1 2011/09/309:21:012011/09/309:21:01