Sharp IG-ETC1A User Manual

E-13
IG-ETC1A/E
ENGLISH
Hong Kong/
ASEAN
( )
CARE AND CLEANING
2
1
(Press 3sec.)
FILTER
CLEAN
RESET
Main unit
Filter
Every month
Every month
Wipe with a dry soft cloth.
The Þ lter must be cleaned regularly in order to maintain the ion density.
Filter soiling depends on the usage environment, so clean the filter about once a
week or whenever the Þ lter is clogged, even if the Filter Clean Light has not turned
on.
Use water and a mild detergent. And then, wipe with a wet
cloth. Make sure to dry out the main unit.
<For Stubborn Dirt>
1
2
3
Remove the air suction
port cover.
Attach the air suction
port cover.
Push the Þ lter to the fan cover.
Pull up the Þ lter and remove
it from the fan cover.
Connect the AC adapter and
press the Filter Reset Button
for at least 3 seconds.
Once cleaning is completed,
then press and hold in the
Filter Reset Button for at
least 3 seconds to turn off
the Filter Clean Light.
Attach it by sliding it from upper side to
lower side.
Hook the nail of the Þ lter to the fan cover
securely to attach the Þ lter.
Gently remove dust by
using a vacuum cleaner.
Fan cover
FilterAir suction port cover
• For stubborn dirt, wash
with water, remove water,
and dry it in the shade.
Nail of the Þ lter
(2 part)
Even i f the Filter Clean
Light is off, press and hold
the Filter Reset Button for
at least 3 seconds after
cleaning.
Note:
• Filter Clean Light will be lit after approx. 1 month (approx. 720 hours), when operated 24 hours a
day.
Beep
(Or more often if necessary)
(Or more often if necessary)
IG-ETC1Een.inddSec1:132012/09/2416:33:43

Sharp IG-ETC1A Specifications

General

Brand	Sharp
Model	IG-ETC1A
Category	Air Cleaner
Language	English