Sharp LC-19DV24U

Watching TV
Skipping stored channel
You can set channel selection disabled using CHAfv.
1 Press TV MENU and the MENU screen displays,
2 Press A/v to select "Channel", then press P-or ENTER.
3 Press A/_r to select '!Add/Delete _, then press _- or
ENTER.
4 Press A!V to select'_dd/Delete", then press _ or
ENTER,
5 Press Air to select the channel that you want to skip.
6 Press <tv to select"Delet#' for selected channel.
7 Press EXIT to return to the normal screen.
• To add a digital channel you are watching:
Select a channel you want to add. Then select "Adding
Channel" in step 4, press _-.
• To release the skipping channel:
Select "Add" in step 6.
All channels are deleted from the channel memory.
1 Press 13/MENU and the MENU screen displays.
2 Press Air to select"Channel", then press _ or ENTER.
3 Press A/V to select"Add/Delete", then press I_ or
ENTER.
4 Press a/T to select "Clear AIt", then press P, or ENTER.
5 Press EXlTto return to the normal screen.
Press DISPLAY to display the current channel (or
input source) information on the screen.
When the TV receives a digital signal, the digital information
will appearfor a few seconds.
• Channel number o Station name
• Channel label (if preset) • Broadcast program name
• V-Chip rating • Signal type
• Sleep timer • Audio language
• Program guide • Picture size
• Resolution
When theTV receives a analog signal, the analog
information will appear.
• Channel number
• V-Chip rating
• Sleep timer
• Picture size
- Channel label (if preset)
• Signal type
• Audioinformation(StereoorSAP)
• Resolution
Setting MTS/SAP stereo mode
The TWDVD has a feature that allows reception of
sound other than the main audio for the program.
This feature is called Multi-channel Television Sound
(MTS). The TV/DVD with MTS can receive mend
sound, stereo sound and Secondary Audio Programs
(SAP). The SAP feature allows a -D¢/DVD station to
broadcast other information, which could be audio in
another language or something completely different
like weather information.
You can enjoy Hi-Fi stereo sound or SAP
broadcasts where available,
• Stereo broadcasts
View programs like live sporting events, shows and
concerts in dynamic stereo sound.
* SAP broadcasts
Receive TV broadcasts in either MAIN or SAP sound.
MAiN sound: The normal program soundtrack (either in
mend or stereo).
SAP sound: Listen to a second language, supplementary
commentary or other information. (SAP is mend sound.)
If stereo sound is difficult to hear.
• Obtain a clearer sound by manually switching to fixed
rnono-sound mode.
• MTS onlyoperateswhile inTV mode.
• MTS isavailable onlywhen receivinganalog broadcasting,
not when receiving digital broadcasting.
- When the TV receives a stereo or SAP broadcast, the
word "Stereo" or "SAP" displays on-screen if you press
DISPLAY.
Changing MT5
You can change MTS as shown below to match the
televisionbroadcast signal.
1 In analog TV mode, press AUDIO and the "Audio"
menu screen displays. "MTS" will be highlighted.
2 Press AUDIO again or </_ to select "Stereo",
"SAP" or "Men o".
3 PressEXiT to returnto the normalscreen.
When two or more audio languages are included
in a digital signal, you can select one of the audio
languages.
1 In digital TV mode, press AUDIO and the "Audio
Language" menu screen displays.
2 Press A/v or 0-6 to sefectyour desired language.
3 Press EXIT to return to the normal screen.
• Digital audio language is active only when receivingdigital
boardcasting,not when receivinganalogboardcasting.
(_-16