Connecting a PC (Personal computer)
i i un nlllnii
Viewing an imagefrom a PC _:i "
Use the INPUT4 (PC) terminals to connect a PC.
• The PC input terminals are DDCtt2B-compatib]e,
• Refer to "PC compatibility chad" for a list of PC signals compatible with the System.
• Make sure to select the same signal values for the output signal of a PC and the input signal of the TWDVD set before
connecting with the PC. (See page 23,)
• Depending on the PC being used, images may not be shown without converting the output signals into external output.
Please refer to your PC's manuals regarding converting to external output.
Connect the ROB cable making sum I
_ 1hatittits correctlyintothe terminal. I
_[t I _ Then_ure the connectors by I
I _ tightening the screws onboth sides 1
[ of the plug. J
PC
AN'LOG"G4
.,to 'oo'J
_!,
_.............._,/_ 0 3,5mmsternerninijackcable_-_.
Pin No.
®
®
®
®
®
®
®
Signal names for 15-pin mini D-cub connecter
Signal name Pin No.
R ®
a _
a ®
Not connected @
CSYNC @
GND (Ground) _)
GND (Ground)
GND (Ground)
Signal nsme
+SV
GND (Ground)
Not 6onnected
SDA
HD
VD
SOL
• Pin No. 5 isnot used for inputting the signal.
• Pin No, 9 isnotconnectedwiththe suppliedRGB cable.
To view an image from a PC, perform the following
procedure.
(D Select the Input4 (PC) mode using INPUT on the remote
controlor the TVtDVD set. (See page 14.)
(_) Selectthe PC input signal.
(_) Adjust the "Picture," items if the PC imagedoes not come
in clearly. (See page 23.)
- 24
31.5 60
640 X 4gO
3_'.g 85
729 X 40@ 31.5 70 ,I'
V_vA 37.S B5
8t.5 60 _'
_7.9 72
640x4BO
S7.5 75
43.3 85
WVGA 84_ X 4Br_ 81,0 60
35.1 56
37.9 60
PC SVGA 8_g xBOg 48.1 72
46,9 75
53,7 85
48.4 60 _"
56.5 70
XGA 1,1124 X 76B
60.0 75
1,280 x 720 44.B ISO ,¢
47.8 EO ,/
WXC-:-:-:-:-:-:-:-:-_1,280 x 768
48.1 BO
8XGA 1_280 X 1,024 64,0 60
WXGA+ 1.440x 900 5S,g 60 _/
MAC 13" VGA 640x 480 34.e 67
MAC16 = ,_VGA 832x 624 49.7 75
MACtg" XGA _J_24x768 60,2 7_ .......J
To Next Page
Loading...
Need help?
General
