Sharp LC-26SH7E User Manual

Preparation
Installation of batteries
Insert two AAA batteries into Remote control. 1.
Make sure (k) and (l) are facing the proper
direction.
Replace the cover.2.
NOTE
If the remote control will not to be used for a long •
time, remove the batteries to avoid remote control
damage.
CAUTION
Improper use of batteries can result in chemical
leakage or explosion. Be sure to follow the instructions
below.
Do not mix batteries of different types. Different •
types of batteries have different characteristics.
Do not mix old and new batteries. Mixing old and •
new batteries can shorten the life of new batteries or
cause chemical leakage in old batteries.
Remove batteries as soon as they have worn out. •
Chemicals that leak from batteries can cause a rash.
If you find any chemical leakage, wipe thoroughly
with a cloth.
The batteries supplied with this product may have a •
shorter life expectancy due to storage conditions.
If you will not be using the remote control unit for •
an extended period of time, remove the batteries
from it.
Note on disposing batteries:
The batteries provided contain no harmful materials
such as cadmium, lead or mercury.
Regulations concerning used batteries stipulate
that batteries may no longer be thrown out with the
household rubbish. Deposit any used batteries free of
charge into the designated collection containers set up
at commercial businesses.
Using the remote control
Use the remote control unit by pointing it towards the
remote control sensor. Objects between the remote
control unit and sensor may prevent proper operation.
30° 30°
Remote control sensor
EPG
YPbPr
P
PRE PR
5m
Display the Menu Screen
Press MENU / EXIT and the menu screen displays.
Select an item by the remote control
Press 1. <>≥ to select the desired menu.
Press
2. ≤≥ to select / adjust the item to the
desired level. The setting on screen is applied
immediately.
Press
3. MENU / EXIT to return to the previous
layer .
Select
Menu
Brightness
Contrast
Colour
Tint
Sharpness
Colour Temperature
Advanced Control
50
50
50
0
3
Normal
Sound
Picture
TV
Features
Parental
Eco
BackEXIT
PersonalSmart Picture
3
Exit the Menu Screen
The operation will exit the menu screen if you press
MENU / EXIT before it is complete.
6

Sharp LC-26SH7E Specifications

General

Comb filter	Digital
Display diagonal	26 \
Display brightness	450 cd/m²
Display resolution	1366 x 768 pixels
Display technology	LCD
Native aspect ratio	16:9
Viewing angle, vertical	150 °
Contrast ratio (dynamic)	8000:1
Contrast ratio (typical)	800:1
Viewing angle, horizontal	160 °
Power requirements	220 - 240V AC, 50 - 60Hz
Headphone connectivity	3.5 mm
SCART ports quantity	2
Digital audio coaxial out	1
Product color	Black
Panel mounting interface	200 x 100 mm
Power consumption (standby)	0.3 W
Power consumption (typical)	55 W
RMS rated power	10 W
Tuner type	Analog & digital

Weight and Dimensions

Depth (with stand)	239.8 mm
Width (with stand)	657.8 mm
Height (with stand)	491.1 mm
Weight (with stand)	8400 g
Depth (without stand)	91.6 mm
Height (without stand)	448.4 mm