QUICK REFERENCE
1 Attach your antennato the back of the television. 3 Bundlethe cords properlywith thecable tie.
(Seepage 8.)
2 Connect the AC plug for the television into the AC
outlet.
i .....
• Place the TV close to the AC outlet, and keep the power
plug within reach.
• This product must only be connected to a 120V, 60Hz,
grounded (3-prong) outlet.
Connecting it to any other kind of outlet will damage the
product and invalidate the warranty.
4
How to turn on the television for the first time.
A) Press POWER on the television.
B) The POWER indicator on the front of
the television lights BLUE.
1
TO PREVENT RiSK OF ELECTRIC SHOCK, DO NOT
TOUCH UN=INSULATED PARTS OF ANY CABLES
WITH THE AC CORD CONNECTED.
,, Speakers cannot be detached from the TV.
Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the
remote control unit and the remote control sensor may prevent proper operation.
I
[] Cautions regarding the remote control unit
Do not expose the remote control unit to shock. In addition,
do not expose the remote control unit to liquids, and do not
place in an area with high humidity.
Do not install or place the remote control unit under direct
sunlight. The heat may cause deformation of the remote
control unit.
The remote control unit may not work properly if the remote
control sensor on the TV is under direct sunlight or strong
lighting. In such cases, change the angle of the lighting
or the TV, or operate the remote control unit closer to the
remote control sensor.
iMPORTANT:
The POWER indicator on the television should light BLUE indicating you have power to the television.
Ifthe POWER indicator on the television still does not light up, press POWER on the remote control to turn the power on.
IMPORTANT:
IF THE UNIT DOES NOT POWER ON - UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE INSTALLATION
STEPS.
IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP.
(D-7
To Next Page
Loading...
Need help?
General