2008-03-14
LC-42SB45U
27
D) Installation:
Language: English
Clock: -- : -- AM
Current software info: TPV Version: FL4 ATSC Vx.xx.x yymmdd
[2] CSM MODE
How to Enter CSM mode method :
Step1: Press number key “123654” on remote control.
Step2: It will show CSM mode picture as below.
Step3: Press menu or volume up down key to exit CSM mode.
every item’s meaning as below :
Customer Service Menu 1
1:Set Type to be retrieved out of production -data
2: Production code 14 digit production -cde to be
retrieced per set to be written in NVM/EEPROm
3:SW-naming main-processor SW-naming of MSTAR
/Trident.see format in generic service document
4:SW-naming extra processor if valid
5:Code 1"Logging I2C errcodes in NVM/EEPROM
(5 last logged errors)
6:Code 2"Logging I2C errcodes in NVM/EEPROM
(5 last logged errors)
7:Key(HDCP)-HDMI information whehther
HDCP-Key is valid
8:Digital signal quality:(for Digital TV only)
9:NVM-naming :panel information
Error Code :
Error Code Type Error Code Store to EEPROM
TUNER 3 Yes
To Next Page
Loading...
