LC-42SB45U
28
[3] FACTORY MODE
How to Enter factory mode menu:
1. Press Numeric keys “062596” + “Display” key (you should keep “Display” key until display below picture)(FAC
mode menu).
2. Scroll to the “Factory” selection and press “
”, then choose”start now” and press”ENTER”key to enter the factory
model
Start now
3.In the factory setting,press”
“and “ “ key to set the state that you want.
4.Press “Menu” to exit. or select “0” in the menu selection by up/down key then press enter.
Note: How to reset the factory setting?
1.Enter the facotry model(see page 28),then choose item 8 “VIRGIN_MODE” .
To Next Page
Loading...
