2008-03-14
LC-42SB45U
31
PL-2303 Driver Installer.exe
2. Unzip USB2COM Driver.zip to C:\
Use MTK_Tools to download .bin file. (Ex: F4_dbg_image.bin or F4_image.bin)
3. Make sure the Type “MTK538X” && “USB Baud Rate 115200” && Load the correct “bin” file.
Load .bin file on the Linux system or on the local Windows file system(Ex: SHARP_ATSC_DLH_V0_34A_080714.bin) & Set
Bridge & Auto Set Flash BaudRate
4. Set COM port resource that used by USB Port.
PL-2303 Driver
Installer.zip
PL-2303 Driver
Installer.zip
To Next Page
Loading...
