Sharp LC-52XS1E User Manual

Other useful features
Input Select
Option
For setting the signal type of external equipment.
NOTE
If no (colour) image displays, try changing to another
signal type.
Check the operation manual of the external equipment for
the signal type.
When the signal type is set to “Auto”, the input terminal
where a cable is connected is automatically selected.
•
•
•
Input Label
Setup
You can label each input source with a custom
description.
Press b to select the desired input source.
Go to “MENU” > “Setup” > “Input Label”.
Press a/b/c/d to select each character of the
new name for the input source, and then press
OK.
A
BACK
CLEAR
END
K
U
B
L
V
C
M
W
D
DVD
N
X
E
O
Y
F
P
Z
G
Q
+
H
R
– _
I
S
.
J
T
0 1 2 3 4 5 6 7 8 9
Repeat until the label is fully spelt out.
NOTE
The label can be six characters or less.
When you want to set an input source label of less than six
characters, select “END” to set the name.
INPUT SOURCE
TV
EXT1
EXT2
DVD
EXT4
HDMI1
EXT6
NOTE
You cannot change labels if the input source is “TV” or
“USB”.
1
2
3
4
•
•
•
Input Skip
Setup
This setting allows you to skip the SCART, HDMI,
RGB, ATV, DTV or SAT input on the Input Source
Selection operation.
EXT1 (SCART)
EXT2 (SCART)
EXT4 (RGB)
HDMI1
HDMI2
HDMI3
ATV
DTV
SAT1
SAT2
SAT3
Yes
No
Colour system settings
You can change the colour system to one that is
compatible with the image on the screen.
NOTE
The factory preset value is “Auto”.
If “Auto” is selected, the colour system for each channel
is automatically set. If an image does not display clearly,
select another colour system (e.g. “PAL”, “SECAM”).
Additional features
•
•
Setting Display Colour
Option
You can change the background colour of the OSD
(menu screen), EPG screen, channel display and
programme information, etc. to the blue, gray, red or
green.
Colour System
Option
Setting when using external
devices
Input source settings
EXT1: Y/C, CVBS, RGB
EXT2: Y/C, CVBS, RGB
EXT8: Auto, S-VIDEO, VIDEO
Skipping specified inputs
Linked to main power: The wireless unit’s power will be turned
on in conjunction with the main power of the Display.
Power always on: The wireless unit’s power will be usually
turned on.
Wireless power link
Setup
When turning on the main power of the Display
while “Wireless power link” is set to “Linked to main
power”, the power of each wireless unit connected
to the Display and AVC System will be turned on in
conjunction with the main power of the Display.
41
Item
Item

Sharp LC-52XS1E Specifications

General

Brand	Sharp
Model	LC-52XS1E
Category	LCD TV
Language	English