Sharp LC-60 EQ10U - Precautions for Assembly (LC-60;70 EQ10 U;SQ10 U,15 U,17 U)

LC-60/70EQ10U,SQ10U/15U/17U,TQ15U,UQ17U
4 – 14
[4] Precautions for assembly (LC-60/70EQ10U/SQ10U,15U,17U)
1. Points to be checked and precautions when servicing the unit
Mount the main PWB Ass’y on the backlight chassis and check that the EMI-prevention parts are not peeled and twisted from the access holes. (The
EMI-prevention parts, conductive nonwoven fabric gaskets, must be seen from the access holes.)
[Countermeasure]
Attach the conductive nonwoven fabric gaskets on the shielded case on the main PWB.
• LC-60EQ10U/SQ10U,15U,17U
Back side
(1) Prepare***
LANGKD145WJFW
TE RM AN G SIDE
(2) Stick ***
PSPA Z C690WJZZ
CONDUCTR:8x 255
Positioning
Pos it ion ing
Back side
Positioning
Pos itio nin g
(1) Prepare***
LANGKD146WJFW
TE RM A NG BOTTOM
(2) Stick ***
PSPA Z C6 91 WJZ Z
CONDUCTR:8x 180