Sharp LC-65D90U - Page 30

30
LC-65D90U
Adjustment item Adjustment conditions Adjustment procedure
1 Setting DVI-I (digital) signal:
XGA (1024 x 768)
60Hz
SYNC: HV separate
2 Automatic
adjustment
• Feed the XGA 100% white, 1/2window signal to DVI-I (digital) input.
Move the cursor to [ËDVI DIGITAL ADJ] and press the "ENTER" key.
When [ËDVI DIGITAL ADJ FINISH] appears, the adjustment is complete.
(7) DVI-I (digital) signal adjustment
(8) HDMI signal adjustment
Adjustment item Adjustment conditions Adjustment procedure
1 Setting Recommended
signal generator:
Leader Electronics
made LT448
1080i/59.94
(30sF): RGB
digital output
2 Automatic
adjustment
• Prepare the 1080i/59.94 (30sF) RGB digital output signal.
• Feed the 100% color bar signal from the signal generator's DVI terminal
via the DVI-HDMI conversion cable to the HDMI input.(Dynamic range:
Min. 16 to Max. 235)
Move the cursor to [ËHDMI ADJ] and press the "ENTER" key. When
[ËHDMI ADJ FINISH] appears, the adjustment is complete.
100% White
0% Black
1/4
1/4
1/2
1/4
1/4
1/2
↑100% white ↑0% black
1080i, 100%
color bar
RGB digital
Color saturation 100%