CONFIDENTIAL – DO NOT COPY
Page 11-1
File No. SG-0000351
Chapter 11 How to Enter Factory/Service Mode
Enter Factory Menu
1. Set the TV under an input source
A. TV, AV IN, Component or HDMI
B. Not in the Setup Wizard or MMP
2. Press <MENU> key on RC to show the Main Menu
3. Enter the Factory Menu 4 digits password <2, 4, 8, 9> to show Factory Menu
NOTE: DO NOT Select EXIT while in Factory Mode, MUST select "CLEAN STORAGE" under
SET UP to EXIT properly.
Enter Service Menu
1. Set theTV under an input source
A. TV, AV IN, Component or HDMI
B. Not in the Setup Wizard or MMP
2. Press <MENU> key on RC to show the Main Menu
3. Enter the Service Menu 4 digits password <4, 3, 9, 8> to show Service Menu
To Next Page
Loading...
Need help?
General