Sharp MD-C2 User Manual

MD-C2
– 28 –
• UTOC was read but total TNO and the number of characters of
NAME was 0?
• Although UTOC can be read but UTOC cannot be rewritten.
• Data of EEPROOM is not correct.
Error display
Errors
Corrective action
BLANK MD
TOC W ERR
MD ERR
• Perform recording to check that the disc
is recordable disc.
• Check that the record head contact is
normal. Check that there is no broken
wire between PWB and the recording
head.
• Perform adjustment
• Once reset, and redo. If error occurs
persistently, replace EEPROM.
EXPLANATION OF MECHANISM ERROR
Error display
Errors
M E C H A _ * _ ERR None of the operations is completed properly.
HINF (IC1401 97 PIN)
* = E Ejection completion position < 1.3 V
* = MHorizontal midway position > 3.06 V
* = L Load completed position 1.853~2.48 V
* = D Head-down position 1.3~1.853 V
The CD changer mechanism did not operate normality.
Error display
Errors
Corrective action
_ TRAY _ ERR _ • Turn the power off, and then turn the
power back on. If an error display
appears,check the CD changer section.
CD section
Error display
No cassette tape has been loaded, or the tape in the unit cannot be re-recorded.
TAPE section
Can't _ REC _
Errors

Sharp MD-C2 Specifications

General

Brand	Sharp
Model	MD-C2
Category	Stereo System
Language	English