Sharp MD-MT888H - Advanced Recording

01/8/30 4.fm
28
MD-MT888H
Useful Features
-Advanced Recording-
Advanced Recording
„ Playback sound-actuated recording
Recording automatically starts or pauses by detecting
sound from the stereo system (Synchronised recording).
1
Hold down the REC button for 2 seconds or
more.
You can perform the same operation by simply press-
ing the REC button on the main unit.
2
To perform group recording, hold down the
GROUP button for 1 second or more so that
"GROUP" is lit.
When group recording is not performed, hold down
the GROUP button for 1 second or more so that
"GROUP" goes out.
3
Begin playback on the stereo system con-
nected to this portable MD.
4
Move the M button toward or to adjust
the recording level (page 20).
You can perform the same operation by pressing the
or button on the main unit.
5
Press the PAUSE button on the stereo sys-
tem to enter the playback pause mode.
Select the starting point for your recording and press
the PAUSE button.
6
Press the MODE button repeatedly to select
the recording mode (page 29).
7
Press the M button.
z
The unit enters the menu select mode.
z
You can perform the same operation by pressing
the SYNC button on the main unit. (At this time,
steps 8-9 can be omitted.)
8
Move the M button toward
or to select
"S(SYNC)" and press it.
9
Press the M button.
Synchro recording will be
paused.
10
Begin playback on the stereo system. Re-
cording will begin automatically.