01/8/30 6.fm
60
MD-MT888H
References
-Error Messages-
Error Messages (continued)
Number or symbol appears in (*) position.
ERROR MES-
SAGES
MEANING
G-FULL
z
The total number of groups exceeds
99.
(Erase unnecessary groups.)
HOLD
z
The unit is in the hold mode.
LoBATT
z
The rechargeable or alkaline battery
has run down.
LOCKED
z
You removed a MiniDisc whilst record-
ing or editing.
(Turn off the power before removing the
MiniDisc.)
N-FULL
z
The number of a disc, group, or track
name exceeds 40.
(Shorten the name.)
NoDISC
z
A disc has not been loaded.
noSIG.
z
Poor connection of the digital cable.
z
No output signal comes out from the
connected unit to playback.
(Use the AC power for the connected
unit.)
z
The input signal has improper sam-
pling frequency.
ERROR MES-
SAGES
MEANING
NoTRACK
z
There is no track to be played.
PLAYmd
z
You tried to record on a playback-only
disc.
POWER ?
z
The battery charger is defective.
PROTECTED
z
The write protection tab of a MiniDisc
is set to the protected position.
Sorry
z
Since a track number is currently be-
ing located or updated, the unit cannot
accept your command.
(Wait for a while and try the operation
again.)
T Form (*)
z
There is an error in the recording sig-
nal.
(Erase all of the tracks, and then record
again.)
T-FULL
z
There is no space left for recording
character information (track names,
disc names, etc.).
TEMP!
z
The temperature is too high.
(Turn off the power, and wait for a while.)
To Next Page
Loading...
